Yamaha EMX 5 12-Input Powered Mixer
Your shopping cart is empty!
Product Description
Yamaha EMX 5 Specs
| Input Connectors |
Channels 1-4: 4x Combo XLR-1/4" / 6.35 mm
Channels 5/6: 1x XLR, 2x 1/4" / 6.35 mm Channels 7/8: 1x XLR, 2x 1/4" / 6.35 mm Channels 9/10: 1x XLR, 2x RCA Channels 11/12: 1x XLR, 2x RCA, 1x 1/8" / 3.5 mm stereo mini-jack |
| Load Impedance |
Channels 1-4 (XLR Mic/Line): 3 kOhms actual, 50-600 Ohms nominal with mics
Channels 1-4 (1/4" Mic/Line): 8 kOhms, 600 Ohms line Channel 4 (1/4", Hi-Z Engaged): 1 MOhms actual, 10 kOhms lines nominal Channels 5-12 (XLR): 2 kOhms actual, 50 - 600 Ohms lines nominal Channels 5-12 (1/4", RCA, 1/8"): 10 kOhms actual, 600 Ohms nominal |
| Input Level |
Sensitivity
Channel 1-4 (XLR, Mic): -60 dBu (0.775 mV) Channel 1-4 (XLR, Line): -30 dBu (24.5 mV) Channel 1-4 (1/4", Mic): -50 dBu (2.45 mV) Channel 1-4 (1/4", Line): -20 dBu (77.5 mV) Channel 4 (Hi-Z Engaged, Mic): -50 dBu (2.45 mV) Channel 4 (Hi-Z Engaged, Line): -20 dBu (77.5 mV) Channels 5-12 (XLR): -60 dBu (0.775 mV) Channels 5-8 (1/4"): -20 dBu (77.5 mV) Channels 9-12 (RCA, 1/8"): -8 dBu (316 mV)
|
| Output Connectors |
Stereo Out (L/R): 2x 1/4" / 6.35 mm balanced
Aux Sends (1/2): 2x 1/4" / 6.35 mm balanced Rec Out (L/R): 2x RCA unbalanced |
| Impedance |
Stereo Out (L/R): 600 Ohms actual, 10 kOhms Lines
Aux Sends (1/2): 600 Ohms actual, 10 kOhms Lines Rec Out (L/R): 600 Ohms actual, 10 kOhms Lines |
| Output Level |
Stereo Out (L/R): +4 dBu (1.228 V) nominal, +20 dBu (7.75 V) max before clipping
Aux Sends (1/2): +4 dBu (1.228 V) nominal, +20 dBu (7.75 V) max before clipping Rec Out (L/R): -10 dBV (0.308 V) nominal, +18 dBV (7.75 V) max before clipping |
| Connectors |
Speakers A/B: Neutrik speakON NL4, 1/4" / 6.35 mm phone jack
|
| Impedance |
Actual Source Impedance: < 0.1 Ohms
For Use with Nominal: 4 Ohm speakers, 8 Ohm speakers |
| Output Level |
4 Ohm Speakers: 500 W (1 Hz THD+N < 1%), 630 W (1 kHz THD+N < 10% [CEA2006])
8 Ohm Speakers: 370 W (1 Hz THD+N < 1%), 460 W (1 kHz THD+N < 10% [CEA2006]) |
| Output Power |
1 kHz THD+N < 10% (CEA2006): 630 W + 630 W (4 Ohms), 460 W + 460 W (8 Ohms)
1 kHz THD+N < 1%: 500 W + 500 W (4 Ohms), 370 W + 370 W (8 Ohms) |
| Frequency Response |
Frequency Response Refer to the nominal output level @ 1 kHz
Input to Speakers: +1/-3 dB (40 Hz to 20 kHz) Input to Stereo Out, Aux 1/2 Send: +0.5/-1.0 dB (20 Hz to 20 kHz) |
| THD + N |
Input to Speakers: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz)
Input to Stereo Out, Aux 1/2 Send: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz) |
| Crosstalk |
(1 kHz): -85 dB
|
| Input Channels |
Mono (Mic/Line): 8
Stereo: (Line): 4 Total: 12 |
| Output Channels |
Speakers: A/B
Aux 1 Send Aux 2 Send Stereo Out: L/R Rec Out: L/R |
| Bus |
Stereo: 1
Aux: 2 (including FX) |
| Pad |
Channels 1-4: 30 dB
|
| Hi-Z Input |
Channel 4: Supported
|
| HPF |
High Pass Filter (Channels 1-3): 80 Hz, -12 dB/octave
|
| EQ Section |
High: 10 kHz +15/-15 dB
Mid: 2.5 kHz +15/-15 dB Low: 100 Hz +15/-15 dB |
| Compressor |
Single knob compressor
|
| Audio Level Meter |
7 points (-20, -10, -6, 0, +6, +10, Peak)
|
| Built-in Effects |
SPX Algorithm: 24 programs
|
| Output Channel Function |
Master EQ (Speech to Music)
Monitor EQ Feedback Suppressor |
| Phantom Power |
+48 V
|
| Footswitch Input |
Effect mute on/off
|
| Protection |
Load Protection: DC-fault
Amplifier Protection: Overheat protection, overcurrent protection, integral power protection Power Supply Protection: Overheat protection, overcurrent protection |
| Power |
Power Requirements: 100-240 VAC, 50/60 Hz
Power Consumption: 42 W (Idle) / 210 W (1/8 power) |
| Operating Temperature |
32 to 104°F / 0 to 40°C
|
| Dimensions |
18.3 x 12.1 x 12.8" / 464.8 x 307.3 x 325.1 mm
|
| Weight |
20.9 lb / 9.5 kg
|
| Package Weight |
25.4 lb
|
| Box Dimensions (LxWxH) |
22 x 15 x 14"
|
  
